Yongnuo YN568EX-II Remote slave Mode - In S1 & S2 modes the YN568EX-II power should be set manually using the up/down, left/rht buttons. The YN568EX-II can operate as a remote slave flash to many different master types, including another YN568EX-II, a Canon 580EX-II, ST-E2.
Yongnuo YN-468 Instruction Manual The YN568EX-II can operate as a remote (slave) flash to many different master types, including another YN568EX-II, a Canon 580EX-II, ST-E2, 70D, 60D, 600D plus others (Sc mode), or Nikon SB-910, SB-900, SB-800, SB-700, SU-800 and several camera models such as the D700, D800 etc. [set_page_product product=”Yongnuo YN568EX II”] There are four remote operating modes: • Sc (Canon ETTL Remote) • Sn (Nikon i TTL Remote) • S1 (optical slave – manual power – trgered by first flash) • S2 (optical slave – manual power – nores TTL pre-flash – trgered by second flash) To enter remote (slave) mode hold the zoom button for two seconds until the ‘o F’ begins flashing, then press the rht button to sequence through the Sc, Sn, S1 & S2 until you reach the required mode, then press OK to select. Optical slave modes S1 and S2, setting flash functions from camera. Exposure bracketing, flash exposure lock Nikon / Canon, rear. specs compared to Canon 430EX II · specs compared to Nikon SB-600. Canon 580EX II
Yongnuo yn568ex ii In Sc and Sn mode the slave will operate as ETTL / i TTL as commanded by the master flash and no further setup is required. YN568EX II is the first speedlite supports hh-speed flash in China; with. One YN568EX II is able to respectively accept internal flashing of YN568EX II, 580EX II. Rear-curtain sync, FE lock, Modeling Lht, Canon camera menu accessible.
Phottix Odin Set Telecomando Per Flash Ttl, Per Most other places would charge you .50 for a electronic copy or .00 for a hard to read Xerox copy. Per Flash Ttl, Per Canon Speedlite 600Ex 600Ex-Rt 580Ex Ii, 580Ex 550Ex. 2,4 GHz, telecomando flash, TTL e manuale; Telecomando flash TTL e manuale.
Manuale flash canon 580ex ii:
Rating: 93 / 100
Overall: 99 Rates